Help Center Clinic Manager: Settings Schedules
Schedules
What it controls: how reorder dates are worked out, how early a reorder "comes due", the nurse follow-up interval, and the step schedule of check-ins and lab draws.
Click path: Admin → Settings → Schedules.
Who can edit: owner and admin (Change settings).
Next reorder date comes from
A drop-down with three choices:
| Choice (exact words) | What it means |
|---|---|
| the prescription, days supply from the order date, less a lead time (recommended) | Default. Once an order is placed, the next reorder date = order date + the prescription's days supply − the lead time. Before the first order, the default interval (or a date set by hand) is used. |
| the {EMR} autopay date, when they pay, we order | The next reorder date follows the EMR's next autopay date. |
| a fixed interval after the last order | The next reorder date = the last order (or due date, see below) + the reorder interval. |
When the prescription is picked, a hint shows: Until the first order is placed the interval below (or a date set by hand) applies; after that a 30-day Rx comes due for reorder 5 days before it runs out. (The number follows your lead time.)
Example: an 84-day supply ordered on 08/14/2026, with 5 lead days, is due for reorder on 11/01/2026.
Reorder lead time (days before the supply runs out)
Only shown when the date source is the prescription. How many days before the medication runs out the reorder date is set.
- Allowed: 0 to 30 days. Default: 5.
Days supply on orders (per pharmacy, since 11/09/2026)
What it is: where the portal gets the days' supply for an order at this pharmacy, which is what sets the next reorder date under the prescription rule (order date + days' supply − lead days).
Where: Admin → Settings → Pharmacies → the pharmacy's card → Days supply on orders. Set up by Prescripta support with the pharmacy; it shows greyed out for clinics.
| Choice | Use it for | What the portal does |
|---|---|---|
| the pharmacy's record (trust what it reports) (default) | A pharmacy that records the days' supply that was written (Stryker). | Trusts the days' supply the pharmacy reports on its order. |
| ours (catalog default, else the type interval) | A pharmacy that reports its own number that does not match the prescription (Brooksville reports 28 days for every 10 mL vial and 56 for 20 mL, whatever was written). | Ignores the pharmacy's number completely, even when it sends one (since 11/10/2026). The pharmacy's number still shows on the patient page as [pharmacy] says 28 days (not used), so you can see what they reported. |
With "ours", where the days' supply comes from, in order (the first that has a number wins):
- What staff entered on the order sent from the portal. Type 90 on the order and 90 is used, whatever the pharmacy reports back.
- What staff last entered for the same medication on an earlier portal order to that pharmacy. This covers orders written at the pharmacy itself (by phone, fax or the pharmacy's website): they carry the days' supply your team last chose for that medication. An order the pharmacy reported is never used as the source, however new.
- The catalog item's days' supply (Settings → Pharmacies → the pharmacy's catalog).
- The reorder interval in Settings: the membership-name rule's override, else the membership type's interval, else the clinic's Default reorder interval.
When it applies. To every order placed or found at that pharmacy from the moment it is set. Saving a change here brings existing patients in line by itself (Recalculate reorder dates runs in the background, since 11/10/2026); the button under Schedules (below) does the same on demand. It never changes a reorder date someone set by hand, and it changes nothing else: not the patients' follow-ups, memberships or other pharmacies.
Questions people ask
Q: We type 90 days on the Brooksville order and the pharmacy shows 28. Which is used?
A: 90, when the pharmacy is set to ours. What staff entered on the portal order always wins.
Q: An order was written at Brooksville by phone, not from the portal. Which days' supply does it get?
A: The last one your team entered for that medication on a portal order to Brooksville. If there never was one, the catalog item's days' supply, else the Settings interval.
Q: Some Brooksville patients still show overdue after we switched to "ours".
A: Their dates were worked out before the change. Since 11/10/2026 the save recalculates them by itself; for a change made before that, click Recalculate reorder dates (Settings → Schedules) once.
Quantity on orders (per pharmacy, since 11/09/2026)
Settings → Pharmacies → the pharmacy → Quantity on orders: as the catalog lists it (default) or in mL. Some pharmacies want the dispense quantity in mL, not vials (Brooksville asked "how many mLs"). With in mL, every catalog item listed as "1 vial" (or each / bottle / kit) with an mL vial size is shown and sent as that many mL: a 10 mL vial becomes 10 mL on the medication picker, the order form and the order the pharmacy receives; "2 vials" of a 5 mL vial becomes 10 mL. Items without an mL size (creams, troches, capsules) are unchanged. Set up by Prescripta support with the pharmacy.
Recalculate reorder dates (since 11/09/2026)
Only shown when the date source is the prescription. Re-runs the reorder clock of every medication line that came from a pharmacy order, under the current rules:
- per pharmacy, Days supply on orders (Settings → Pharmacies → the pharmacy's card): the pharmacy's record trusts the days supply the pharmacy reports (Stryker records what was written); ours ignores the pharmacy's number even when it sends one, and uses, in order: what staff entered on the portal order, what staff last entered for that medication on an earlier portal order to that pharmacy, the catalog item's days supply, the Settings reorder interval (Brooksville reports 28 days for every 10 mL vial and 56 for 20 mL, so a 90-day testosterone prescription came due at 23 days). Every pharmacy chooses for itself;
- an order placed from the portal always counts the days supply staff entered on it, whatever the pharmacy later reports;
- the lead time above, and the Settings reorder interval (rule override, else type, else clinic default) when nothing else gives a number.
Lines staff typed in are left alone; a reorder date staff pinned is left alone. An open reorder cycle follows the new date (closed when the date moves out of the notice window, as a hand-set date does, and opened again when due). The message says how many patients were recalculated and how many dates moved. Save first.
Since 11/10/2026 it also runs by itself, in the background, when you save a change to a pharmacy's Days supply on orders or to a reorder interval (the clinic default, a membership type's, or a membership-name rule's); the Save message says so. It never moves a date someone set by hand.
Default reorder interval (days)
Full label: Default reorder interval (days), before the first order / when no days supply or autopay date is known.
- Allowed: 1 to 180 days. Default: 28.
- Used for a new membership's first reorder date, and whenever there is no days supply or autopay date to go by.
- A type's own interval (Membership types) or a rule's override wins over this.
- This is the whole chain since 11/10/2026: rule override → type's interval → this default. There is no per-patient interval any more (the Reorder every [ ] days box on the patient page was removed, and the number saved on each patient is no longer read for reorder dates). Saving a new number here recalculates reorder dates by itself in the background (since 11/10/2026, when the date source is the prescription); otherwise Recalculate reorder dates applies it to everyone.
Nurse follow-up interval (days)
The number of days between nurse follow-ups when the step schedule is off.
- Allowed: 1 to 180 days. Default: 28.
- A new membership gets this interval. Patients who already exist keep the interval they have; it can be changed per patient on the patient page.
Reorder notice (days before due)
How many days before the reorder date a reorder "comes due": a reorder cycle opens, it shows as due on the dashboard and in the summary, and (with Auto-prepare on) the prescription is prepared.
- Allowed: 1 to 30 days. Default for a new clinic: 7.
- This is the same setting as Reorders come due N days before the reorder date under Pharmacies. Changing it in one place changes it in the other.
Refill holds (under Pharmacies, below Auto-prepare)
What it is: three drop-downs, Membership payment failed, Lab draw overdue and Billing cancelled at the card processor (only matters for clinics with a card processor under Payments; its default is Hold), each set to Flag only (default) or Hold, provider must override. Clinic logins can change them (they are local to the clinic). Click Save on the Pharmacies section.
Text on screen: "What happens to a prescription when something stands against the refill. Flag only keeps today's behavior, the dashboard cards and the order show a note and the order can still be processed. Hold refuses Process order (and Send selected) until a provider clicks Override hold on the order and gives a reason, which is written to the order and the audit log. Auto-prepare still prepares the order either way, so the provider sees it."
- Membership payment failed: "the EMR (or the portal's own schedule) reports the last payment failed": the patient's payment status is failed (the Payment failed dashboard card).
- Lab draw overdue: "a scheduled lab-draw step (Schedules) is past its date and not marked done": the same patients as the Lab draws overdue card. Only clinics that use the step schedule with a lab step ever see this hold fire.
- Billing cancelled at the card processor: "the processor (Settings → Payments) cancelled the membership's subscription and nobody has ended or kept the membership yet": the same patients as the Billing cancelled at processor card. Defaults to Hold.
- Changing a setting applies at once to every prepared order; nothing is sent or cancelled by the change itself.
- How a held order is released: see "Refill holds" in the Pharmacy page section, Override hold on the order, provider permission, reason required, audited.
- The dashboard card Reorders due ≤ N days, the alerts, the daily summary line Reorders due within N days and the patient page all show your clinic's number.
After an order is placed, next reorder is counted from
A drop-down:
| Choice | What it means |
|---|---|
| the due date (keeps the schedule fixed) | Default. The next date = the old due date + the interval, even if the order was placed a few days late or early. |
| the date it was ordered | The next date = the day the order was placed + the interval. |
This setting is used when the date source is the {EMR} autopay date or a fixed interval. With the prescription, the date always comes from the order date and days supply. (With the autopay source, if the EMR already shows an autopay date after the order's due date, that date is used.)
Follow-up schedule (step schedule)
A step schedule replaces the single nurse interval with a list of steps, such as a 28-day check-in, a 56-day check-in and an 84-day lab draw. Steps count in days from when the patient's membership started. A provider can move that start date on the patient page; the move is flagged on the dashboard.
Follow-ups are the steps. With a step schedule on, a patient's next follow-up date is always their next step that is not done, there is no separate follow-up date running beside it. Logging a call as Answered marks the check-in that is due (or due within 7 days) done and moves the follow-up to the next step. Reorders are not affected.
Each patient keeps the schedule they started on. The steps are copied onto the patient once, when they first get a schedule (a new membership) or when their membership type changes. After that, changing the steps here does not move anyone's dates until you re-apply (see Re-apply to existing patients below).
Moving one patient's step moves the later ones too. On the patient page, Change date on a step moves that step and every later step by the same number of days, so the gaps stay the same (a 90-day and a 180-day follow-up 90 days apart stay 90 days apart). Moving a later step leaves earlier ones where they are. Doing a step early or late does not move anything.
On-screen explanation: each step appears on the dashboard when due; anyone with Mark scheduled follow-up steps done (check-ins, lab draws) closes it. A lab draw that is overdue is flagged on its own card; it never stops a reorder. With a repeat set, the whole schedule runs again.
Use the step schedule
Tick box: Use the step schedule (off = the single nurse follow-up interval above). Off for a new clinic.
When on, the steps table and the repeat box appear.
Steps table
| Column | What it is | Allowed values |
|---|---|---|
| Step | The name staff see, for example "28-day check-in". | 1 to 60 characters (cannot be blank). Up to 30 steps. |
| Type | What kind of step. Drop-down: Check-in call, Lab draw, Provider visit, Other. A Lab draw that is overdue shows in red and on the Lab draws overdue card. | one of the four |
| Counts from (since 11/09/2026) | Drop-down: how the step dates itself. the last one done (for check-ins): every N days, and the clock restarts on the day staff mark it done. a fixed schedule (for labs): every N days on a grid from the start, whatever happens in between. the round (Day N): the step is Day N of a schedule that repeats as a whole (the "Repeat the round every" box), the original behaviour, kept for a sequence such as intake day 7 → review day 84. See "The three ways a step counts" below. | one of the three |
| Every / Day | For the last one done and a fixed schedule: every [ ] days. For the round: Day [ ], days after the membership start (or the date a provider set). | 0 to 730 |
| Applies to | Which membership types this step is for. Click it to open a list with tick boxes: All types (default) or a ticked set of types. Click Done to close the list. Shows All types, the type names (up to two) or "N types". | All types, or any types that have follow-ups on |
| ✕ | Removes the step. |
The starting steps (until you change them) are: 28-day check-in (Check-in call, day 28), 56-day check-in (Check-in call, day 56), Lab draw (Lab draw, day 84).
The three ways a step counts (since 11/09/2026)
Follow-ups are reminders for your team, not a mirror of the appointment book: the portal never reads appointments to move a follow-up (a patient who comes in for something unrelated must not reset a hormone check-in). Staff mark a step done and check the next date.
- the last one done: a recurring reminder. One open reminder at a time. The first is due N days after the membership start (the start-day visit is not a follow-up). When staff mark it done (or log the call as Answered), the next one is due N days after the day it was marked done: late or early. Change date moves the open reminder; the next one counts from the new date once it is done. Nothing else moves it: not other steps, not appointments. If a reminder is left untouched past the clinic's "Follow-ups clear themselves after" window it is marked skipped and the next one appears, so a patient is never left without a reminder. Use this for check-ins: "28-day check-in · the last one done · every 28".
- a fixed schedule: a grid from the start date: day N, 2N, 3N… whatever happens in between. Marking one done does not move the next. Change date on one moves its later repeats by the same days (the grid shifts). A check-in never moves it. Use this for lab draws: "6 Month Lab draw · a fixed schedule · every 180".
- the round (Day N): the step is Day N of a round that repeats as a whole every "Repeat the round every" days. A step happens once per round, so a Day-28 step recurs every 84 days, not every 28. Moving one step carries every later step of the round. This is the original 10/2026 behaviour; it fits a sequence of different steps (intake call day 7 → first check-in day 28 → review day 84), not a reminder that repeats. Most clinics need only the first two.
Example that matches what most hormone and weight-loss clinics want: Check-in (Check-in call · the last one done · every 28) + 6 Month Lab draw (Lab draw · a fixed schedule · every 180). Check-ins come every 28 days from the last one done; labs on day 180, 360, 540…; neither moves the other. A hormone-only type may prefer Check-in · the last one done · every 90.
How a step counts and its "every N" are clinic rules, not part of the patient's frozen plan: changing them in Settings applies to every patient on that step at once, without Re-apply to existing patients (round steps' Day and the round's repeat still freeze per patient as before). Switching a check-in from the round to the last one done keeps its done marks: the next reminder is N days after the last one marked done.
Who exactly picks up a change to Counts from / every N days? The rule is matched by the step itself (its name slot in the table), not by membership type. So:
- A step on the clinic-wide schedule reaches every patient whose plan contains that step, every type that uses the clinic-wide schedule and is allowed by the step's Applies to. Setting every 180 on the clinic-wide lab draw changes the lab schedule for all of those patients at once.
- A type on Own schedule has its own list of steps with their own Counts from and every boxes; nothing set on the clinic-wide steps touches it. Set the clock on that type's own lab draw.
- A type on No step schedule has no steps and is untouched.
- A patient whose plan was frozen while Applies to excluded their type does not have that step at all, so there is nothing for the rule to change, Re-apply current schedule on the patient (or Re-apply to existing patients) gives them the step first.
To give the 6-month rule to some types but not others, use Applies to on the lab draw (or Own schedule for the type), the same as for any step.
Under the table: "Applies to" limits a step to certain membership types, e.g. the lab draw to hormone types only, while the other steps stay on every type that has follow-ups on.
Only membership types with Follow-ups ticked appear in Applies to.
+ Add step
Adds a step called "New step", kind Check-in call, on a day 28 days after the last step. Rename it and set the day.
Repeat the schedule every N days
Repeat the schedule every [ ] days (0 = once).
- Allowed: 0 to 730. Starting value: 84.
- 0 = the steps run once.
- With a number, the whole list of steps runs again every N days, counted from the start date. Round 2 of a 28-day check-in with an 84-day repeat is on day 112 (84 + 28), not 28 days after the last step. Patient pages label it "round 2".
- Steps that count from the last one done or a fixed schedule do not use this number unless their "every" box is 0; a lab draw with its own 180 stays 6 months apart whatever the repeat is.
Re-apply to existing patients
Under the schedules (after Save schedules) is a cream box:
Each patient keeps the schedule they started on. A change saved here applies to patients whose schedule starts from now on (new memberships, or a change of membership type). Patients already on a schedule keep their steps and dates; give them the new schedule one by one with Re-apply current schedule on the patient page, or everyone at once below. Steps already marked done and dates already moved are kept either way. Turning the step schedule off (or "No step schedule" for a type) stops it for everyone.
- Re-apply to existing patients (needs Change clinic settings): asks Give every patient already on a step schedule the clinic's current schedule (save your changes first)? Steps already marked done and dates already moved are kept. Then shows N patients now on the current schedule.
- Save your schedule changes first, the button uses what is saved, not what is on screen.
- Patients without a schedule pick one up on the next hourly check anyway.
Schedule per membership type
Below the clinic-wide schedule is Schedule per membership type. It lists every type with Follow-ups ticked. For each type, a drop-down:
| Choice | What it means |
|---|---|
| Clinic-wide schedule | Default. The type uses the schedule above (with its Applies to limits). |
| Own schedule | The type gets its own list of steps. A steps editor opens under the drop-down, titled Steps for {type}, starting from the standard 28 / 56 / 84 steps. It has the same columns as above, except Applies to, and its own Repeat box. |
| No step schedule | The type uses only the plain nurse follow-up interval, no steps. |
Use Own schedule when steps differ a lot (lab draws for hormones, check-ins for GLP-1s). Use Applies to when it is only one step that differs.
To stop a type's own schedule, choose No step schedule or Clinic-wide schedule in the drop-down (unticking the Steps for {type} box does not turn it off).
When Schedules changes take effect
| Change | When |
|---|---|
| Reorder notice | On the next hourly check (or the morning run). Reorders inside the new window open and show as due then. |
| Days supply on orders (per pharmacy) | At once: saving it recalculates existing patients' reorder dates in the background (since 11/10/2026; dates set by hand are not moved), and every later order follows it. |
| Reorder lead time, Next reorder date comes from, counted from | The next time a reorder date is worked out: when an order is placed, or (autopay source) at the next EMR sync. Existing reorder dates are not recalculated: nothing runs over all patients when you save. The new rule applies the next time each patient's date is worked out. |
| Default reorder interval (and a type's or rule's interval) | At once when reorder dates come from the prescription: saving recalculates existing reorder dates in the background (since 11/10/2026). Also for memberships created after you save. |
| Nurse follow-up interval | For memberships created after you save. |
| Step schedule, Applies to, per-type schedules | For patients whose schedule starts after you save (new memberships, a change of type). Patients already on a schedule keep theirs until you click Re-apply to existing patients (or Re-apply current schedule on one patient). Turning the step schedule off, or No step schedule for a type, stops it for everyone on the next hourly check. |
Questions people ask
Q: Why does the next reorder date say "from the prescription" instead of "every 28 days"?
A: Your date source is the prescription. The date is the last order date + the days supply − the lead days. The 28-day interval only applies until the first order is placed.
Q: Why did a reorder show up for a patient whose last order was weeks ago?
A: The reorder date comes from the prescription. For example, an 84-day supply ordered 08/14/2026 is due 11/01/2026 with 5 lead days. With a 7-day notice, the reorder opens on 10/25/2026 and (with Auto-prepare on) is prepared for provider approval then. Nothing is sent until a provider approves and an authorized user sends it.
Q: What is the difference between "lead time" and "notice"?
A: Lead time moves the reorder date earlier than the day the medicine runs out. Notice decides how many days before the reorder date staff are told and the reorder opens. With 5 lead days and 7 notice days, a reorder opens 12 days before the supply runs out.
Q: The Auto-prepare setting said "4 days" and I couldn't change it.
A: That number is the clinic's reorder notice. It can be changed under Schedules → Reorder notice (days before due) or right under the Auto-prepare tick box in Pharmacies. It is one setting.
Q: If I set the lab draw to "a fixed schedule, every 180", which patients does it change?
A: Every patient whose plan contains that step, the rule follows the step, not the type. On the clinic-wide schedule that is every type using the clinic-wide schedule that the step's Applies to allows, all at once and without re-applying. A type on Own schedule has its own lab step with its own boxes; a type on No step schedule is untouched; a patient whose frozen plan never had the lab (Applies to excluded them at the time) gets it only after Re-apply current schedule.
Q: Lab draws show up for membership types that never get labs. How do I stop that?
A: In the steps table, click Applies to on the lab-draw step and tick only the types that get labs. Check-ins can stay on All types. For a type that should have no steps at all, pick No step schedule for it under Schedule per membership type. Save.
Q: I changed the step schedule but my patients still have the old steps.
A: On purpose, each patient keeps the schedule they started on, so dates people were already told do not move by themselves. Click Re-apply to existing patients under the schedules (after saving), or Re-apply current schedule on one patient's page. New patients get the new schedule right away.
Q: I don't see the "Applies to" column.
A: It only shows on the clinic-wide schedule, and only when at least one type has Follow-ups on. Per-type schedules don't have it.
Q: A type is missing from "Schedule per membership type".
A: Only types with Follow-ups ticked are listed. Tick Follow-ups for that type under Membership types & rules.
Q: Can I move one step's date for one patient?
A: Yes, on the patient page: Follow-up dates → Scheduled steps → Change date on that step. Every later step moves by the same number of days. Use schedule date puts it (and the later ones) back. Settings changes the schedule for everyone.
Q: We did the 90-day call two weeks late. Does the 180-day move?
A: No. Doing a step late or early never moves the others; the 180-day stays on day 180 unless someone moves it with Change date.
Q: Does an overdue lab draw stop the patient's reorder?
A: No. It is flagged on the Lab draws overdue card only.
Q: Where does "round 2" come from?
A: From Repeat the schedule every N days. Round 2 counts from the start date + N days.
Q: I changed the default reorder interval but existing patients kept their old dates.
A: That is expected. The default is for new memberships and for patients with no days supply or autopay date. Change a single patient's interval or date on the patient page.
