Help Center Clinic Manager: Ordering and the pharmacy The Pharmacy page

The Pharmacy page

Where: the Pharmacy link in the top menu. Who: people with Stage a prescription for the pharmacy (prepare, not send) (owner, admin, provider, nurse by default), when the plan includes the pharmacy feature. Anyone else is sent back to the dashboard.

The top of the page

Click anywhere on a row to open it (since 11/02/2026): the whole row lights up as you hover; a click on the row opens the patient's page. Clicking a button, link, tick box or drop-down inside the row does only that; selecting text never opens anything.

  • Title: "Pharmacy, pharmacy name" when the clinic has one pharmacy, or just "Pharmacy" when it has several. On the right: "as of MM/DD/YYYY" (today in the clinic's time).
  • Red banner for each connected pharmacy that Prescripta has switched off: "Pharmacy is switched off for this clinic, contact support. You can still stage prescriptions for it; sending is blocked until it is back on."
  • Number boxes:
BoxCounts
due, no prescription yetrows on the Due for reorder tab
pending provider approvalrows on the Awaiting approval tab
of those prepared by Autorows on Awaiting approval that Auto-prepare made and nobody has edited (labeled by Auto)
ready to send nowrows on Awaiting approval with nothing left to fix
at the pharmacy, not shippedrows on the At the pharmacy tab
  • Tabs: Due for reorder (N), Awaiting approval (N), On hold (N) (when there are any), At the pharmacy (N), Shipping (N), Found at the pharmacy (N). Shipping (N) counts the shipped orders nobody has marked delivered yet plus the shipping e-mails not matched to a patient; Found at the pharmacy (N) counts the pharmacy orders waiting to be added or linked. The two numbers refresh each time you switch tabs. If the Due tab is empty but Awaiting approval has rows, the page opens on Awaiting approval.

The first three tabs share:

  • a Search by name box (with Clear) that filters the rows shown,
  • a tick box on every row. Since 10/29/2026 the selection bar sits above the list (it stays in view as you scroll) and says how many are ticked, or "Tick rows to act on several at once": with the tab's commands and Clear selection,
  • a table: Patient (link to the patient page, with the membership type under the name), Reorder date (date plus a pill: Overdue, Due today or Due soon), Medication, Pharmacy (only with several pharmacies), Status (or Pharmacy status on Sent), and buttons,
  • Open on every row, which opens the reorder pane right under the row (the same pane as on the dashboard: medication, pharmacy history, the open order and the Order / Open order button). Close folds it.
  • "Nothing here." when the tab is empty.

The Medication column shows the prepared lines when there are any, else the saved medication (or the type default), else a red not set pill. "· from pharmacy history" means the medication was copied from the patient's last pharmacy order by the portal.

Only patients with an Active membership on a type that has reorders, who are not archived, appear on Due for reorder. Awaiting approval, On hold and At the pharmacy list every patient who is not archived, including a one-off order for a patient without a membership, so nothing waiting on a provider is missed.

Wide lists: when the table is wider than the screen and runs past the bottom of the window, a side-scroll bar is pinned to the bottom of the window under it, so you can move sideways from anywhere in the list.

Tab: Due for reorder

What it is: patients whose reorder date is inside the notice window (or already past) and who have no prescription prepared yet. A reorder more than the clinic's limit past its date (Settings → Memberships & patients → Overdue reorders clear themselves after N days, 60 by default) has lapsed and is not listed here; the patient's row says Lapsed until a new order or a new reorder date.

Text on screen: "Patients whose medication reorder is due within the notice window (or overdue) and has no prescription prepared yet. Preparing one fills in and validates the prescription from each patient's medication (or the type default) and puts it in Awaiting approval, nothing is sent. Types with auto-reorder on (Settings → Membership types) are prepared here automatically by the morning run."

  • Status column: the open cycle's status (for example "upcoming reorder") or "no cycle yet" (the date is in the window but the next check has not opened the cycle yet).
  • Stage for (only with several pharmacies): each patient's usual pharmacy (saved medication → type default → clinic default), or one named pharmacy for every ticked row.
  • Tick boxes on each row, and one in the header to tick every row shown.
  • Delete selected in the bottom bar (needs Cancel an order), deletes the open reorders of the ticked rows; nothing is sent, and a reorder reopens fresh if the patient is still due.
  • Prepare selected (N) in the bar at the bottom ("N selected"). For each ticked patient the portal builds the prescription from their saved medication (or the type default), checks it, and moves it to Awaiting approval. One failure never stops the others. Message: "5 prescriptions now pending provider approval (1 need attention before sending)." and, if any failed, "N could not be prepared: …". The page then switches to Awaiting approval.

Tab: Awaiting approval

What it is: prescriptions that are prepared and saved, pending provider approval. Nothing has been sent.

Text: "Prescriptions pending provider approval, each row shows the prescription under the patient's name so it can be checked without opening it. Tick the ones that are right and click Approve selected (your provider authorization); Send selected sends them to the pharmacy (an unapproved row is approved and sent in one step, logged as your authorization)." (the sentence changes with what you are allowed to do: people who can only approve read "an owner or admin then sends the approved ones"). "Prepared by says who is accountable for each one: a staff member, or Auto when the portal prepared it when the reorder came due and nobody has edited it yet, the first person to edit it takes it over."

  • The summary under the name (since 10/27/2026, Todd: "a summary below the patient name to quickly see, then approve"): every prescription line in bold, drug and strength, then quantity, days supply, refills and the directions, followed by a grey line with the pharmacy, the ship-to (the patient or the clinic), the shipping method (e.g. "Ground", "UPS Next Day", it has a cost, so check it) and who pays (clinic pays / patient pays). Under that, any hold or note that stands against the refill (see "Refill holds" below). This is what a provider reads before ticking a row; to change anything, Open → Open order.
  • Status column: green Approved, ready to send (a provider has signed off; hover for the date and time), orange Awaiting approval (prepared, not yet approved), or red Needs attention (N): hover the red pill to read the problems. A red On hold pill means a refill hold is stopping the send (hover for the reason).
  • Prepared by column: by Taylor (the first name of the staff member who prepared it), or a blue by Auto when the portal prepared it and nobody has edited it. Hover the pill for the full name. Under it, once a provider approved the order: approved by first name. Approving or sending does not change who prepared it; editing an Auto prescription makes the editor the preparer.
  • Prepared by drop-down, everyone, or one person (or Auto), to see only theirs. Shown on Awaiting approval and On hold when more than one person prepared the rows.
  • Tick boxes: any row can be ticked; the header box ticks every row shown. Approve selected (N) and Send selected (N) count only the ticked rows with nothing to fix and skip the rest.
  • Hold selected: asks for one reason and puts every ticked prescription on hold (needs Stage a prescription…).
  • Delete selected: deletes the ticked prescriptions; the reorders stay open and nothing is sent (needs Stage a prescription…). The ✕ on a row does the same for one.
  • Approve selected (N): needs Provider authorization of a reorder (owner, admin, provider by default). A confirm box: "Approve 4 prescriptions as written? This is your provider authorization; an owner or admin then sends them." Each ticked order is checked again and moved to Ready to Order with your name and the time on it. Message: "Approved 4." plus any that were not approved with the reason (a problem on the row, or a refill hold). The rows stay on this tab, now marked Approved, ready to send, until someone sends them.
  • Send selected (N): needs Send a staged prescription…. A confirm box: "Send 4 prescriptions to pharmacy now? This is your authorization of these refills." Each order is checked again, moved to Ready to Order if it was not approved yet (that counts as your approval), and sent. Message: "Sent 4. Orders show Ordered once the pharmacy accepts them." plus any that were not sent with the reason. The page switches to Sent. People with neither permission see "Only an owner or admin can send."
  • Hold on a row (needs Stage a prescription…), "hold to verify, clear it from the list": asks for a reason, then the row moves to the On hold tab (and the dashboard's On hold card) and leaves Awaiting approval and the approval cards until released. Nothing is sent or cancelled.
  • ✕ on a row (needs Stage a prescription…), deletes the prepared prescription; the reorder stays open (see "Ending an order early").
  • Open: to review or change the prescription, click Open, then Open order in the pane to get the order form.

The usual split: the provider ticks and clicks Approve selected once a day; the owner or admin ticks the approved rows and clicks Send selected. A provider who also has the send permission can skip straight to Send selected.

Note: Send selected works only for pharmacies with an electronic connection. For a "by hand" pharmacy, open the row → Open order → Mark as ordered.

Refill holds (failed payment, overdue labs)

Two things can stand against a refill: the membership payment failed, or a scheduled lab draw is overdue (a step from Settings → Schedules past its date and not marked done). What the portal does about it is a clinic setting under Admin → Settings → Pharmacies → Refill holds, one choice per condition:

  • Flag only (the default, and how the portal always worked): the dashboard cards (Payment failed, Lab draws overdue) show the patient, the Awaiting approval row and the patient's order show a grey Note: … line, and the order can still be processed.
  • Hold, provider must override: the row shows a red HOLD: … line and an On hold pill, and Process order, Approve selected and Send selected all refuse the order with the reason ("On hold, the membership payment failed. A provider can override the hold on the order."). Auto-prepare still prepares the order, so the provider sees it.

Holds of either kind, and holds placed by staff with Hold: all land on the dashboard's On hold card and the Pharmacy page's On hold tab, and leave the approval cards until released.

To let a held order through: patient page (or the reorder pane) → the open order's status line → Override hold (needs Provider authorization of a reorder). A box asks for the reason; it is written on the order ("Hold overridden (…): reason"), shown in grey on the row and the order, and recorded in the audit log. The override covers the holds that existed at that moment on that order only, a later order, or a new hold, starts fresh. There is no "undo"; to stop the order, cancel it.

Tab: On hold

What it is: prepared prescriptions that are not going out, the same rows as the dashboard's On hold card. The tab shows only when there is at least one. Text: "Prescriptions that are prepared but not going out. An automatic hold (payment failed / lab draw overdue, with Refill holds set to Hold in Settings → Pharmacies) is released by a provider with Override hold on the patient page or in the pane below; a hold placed by staff is cleared with Release. Released orders go back to Awaiting approval."

  • The prescription summary shows under each name as on Awaiting approval.
  • Prepared by column and drop-down, the same as on Awaiting approval.
  • Why on hold column: "Held by the person's name MM/DD/YYYY: reason" for a staff hold; the automatic reasons in red.
  • On this tab and Awaiting approval the first column is Patient · prescription (the summary sits under the name and the separate Medication column is dropped, so the row stays one block wide).
  • Tick boxes and the bottom bar: Release selected (N) (staff holds only, an automatic hold needs Override hold by a provider) and Delete selected (deletes the prepared prescriptions; the reorders stay open).
  • Release (needs Stage a prescription…), clears a staff hold; the row goes back to Awaiting approval with its prescription untouched. Message: "Name's prescription is back in Awaiting approval."
  • Open: the reorder pane; the order's status line shows the hold and, for a provider, Override hold on an automatic one.
  • The Pharmacy link in the left menu shows a number: how many items in the prescription queues under it are overdue or due (overdue reorders, reorders coming due, prescriptions waiting on a provider, on hold, rejected and so on). Open the queues under Pharmacy to see each one's own count. When only holds are waiting, clicking it opens the On hold tab.

Tab: At the pharmacy

(Called Sent until 10/27/2026.)

What it is: every order the pharmacy has that has not shipped yet, one row per order, newest first, whoever placed it: sent from the portal (electronically or by fax), or placed at the pharmacy directly by phone, fax or the pharmacy's own site and recorded on the patient by the morning check. It answers "what is the pharmacy still working on?". Text: "Every order the pharmacy has that has not shipped yet, newest first … Once an order ships (a tracking number arrives, or the pharmacy reports it finished) it moves to Shipping. Remove takes a row off this list only; the order is not changed."

ColumnWhat it shows
(tick box)Tick rows, then use the selection bar above the list: Remove selected (N) and, for orders at a pharmacy that takes cancel requests (Pharmetika today), Cancel at the pharmacy (N).
Patient · membershipThe patient (link to the patient page) and the membership type under the name.
PlacedThe day the order went to the pharmacy (or was placed there).
MedicationThe prescription on the order.
PharmacyOnly when the clinic has several pharmacies.
Pharmacy statusThe pharmacy's own status, checked hourly (for example Processing). Without one: sent, waiting for the pharmacy (blue, usually a minute or less), faxed, accepted (green), rejected / error (red, open the row to read why, fix it, Re-stage, then Process order again). A grey placed at the pharmacy tag marks orders that did not go through the portal. The pharmacy's order number is under it (#123456).
(buttons)Open (the reorder pane) and Remove.

When a row leaves: as soon as the order ships, a tracking number arrives (shipping e-mail, pharmacy API or typed in), or the pharmacy reports the order shipped: it moves to Shipping. An order the pharmacy reports finished but not shipped (e.g. Stryker "Completed Order") stays here with the pill finished, not shipped yet until it ships or its tracking arrives (since 10/28/2026). A closed order (delivered, cancelled, or taken off the Ordered list) never shows here.

Remove (people who can change order status or approve orders): asks "Remove (name) from the At the pharmacy list? The order stays exactly as it is on the patient." It only hides the row. Tick rows and click Remove selected (N) in the bar above the list to take several off at once. Cancel at the pharmacy (N) (needs Cancel orders) shows when ticked orders are at a pharmacy that takes cancel requests, Pharmetika today, and accepted but not shipped: it asks for one reason (the pharmacy sees it) and sends a cancel request for every prescription line on each order; each order closes here once the pharmacy accepts.

The count matches the dashboard's Ordered · not shipped card, and Shipping matches Ordered · shipped.

Auto-prepare

Where: Admin → Settings → Pharmacies → Auto-prepare prescriptions (tick box). Needs Change settings. This setting belongs to the clinic (it is not set up by Prescripta).

What it does: when a reorder comes due (the notice-window number of days before the reorder date), the morning run, and any hourly check after it, prepares the prescription by itself and puts it under Pending provider approval, labeled by Auto. It never sends.

  • Turning it on also ticks Auto-reorder for every membership type that has reorders (Admin → Settings → Membership types, Auto-reorder column). Untick the types you want to leave manual.
  • Per patient: Patient page → Medications → "Auto-reorder: on/off" with Turn off for this patient / Turn on for this patient, and Follow type setting to go back to the type's choice. Needs Stage a prescription….
  • It only prepares a cycle that is actually due, and only if nobody has already prepared or sent it.
  • Where the prescription comes from: the patient's saved medication → the type's default product at that pharmacy → the patient's last placed order in the portal → the pharmacy's own history of this patient. When it has to copy from an order, the copy is saved as the patient's medication (marked from pharmacy history). A saved medication is never replaced.
  • If none of those exist, nothing is prepared. The patient stays on Due for reorder with a yellow Auto-prepare: no Rx to copy pill. Hover it for: "No medication saved, no previous order in the portal and none found at pharmacy, set the patient's medication, then it prepares itself."
  • Any edit by a person (Re-stage with changes, a different pharmacy) takes it over: the label changes from by Auto to that person's name.

Questions people ask (Pharmacy page)

Q: An order says "finished, not shipped yet". Why isn't it under Shipping?

A: Finished and shipped are two different things. The pharmacy reports the order finished (for example Stryker "Completed Order") but has not said it shipped, and no tracking number has arrived. It stays under At the pharmacy and moves to Shipping by itself when the pharmacy reports it shipped or the tracking arrives.

Q: What shows under Shipping?

A: Only orders that shipped: orders with a tracking number, and orders the pharmacy reports shipped whose tracking has not arrived yet (no tracking yet).

Q: Why is there a red Payment failed chip next to a patient in the queue?

A: Their latest membership payment did not go through (from the EMR or set by staff). Check before approving or sending a refill, your clinic's Refill holds setting decides whether it only flags or holds the order.

Q: I don't see the Pharmacy link.

A: You need Stage a prescription for the pharmacy (prepare, not send), and your plan must include the pharmacy feature. Ask your owner, or check your plan on prescripta.com.

Q: A patient is overdue but not on Due for reorder.

A: Due for reorder only lists patients with no prescription prepared. Look on Awaiting approval or At the pharmacy. Also check the membership is Active, the type has reorders on, and the patient is not archived.

Q: The row shows "no cycle yet".

A: The reorder date is inside the window but the next check has not opened the cycle yet. It opens at the next hourly check. You can also prepare it now with Prepare selected.

Q: Why can't I tick a row on Awaiting approval?

A: It has problems to fix (red Needs attention). Hover the pill to read them, open the row and fix them.

Q: What does "by Auto" mean? And "by Taylor"?

A: Who prepared the prescription and is accountable for it. by Auto: Auto-prepare made it and nobody has edited it yet, open it and review it before sending. by Taylor: Taylor prepared it (or edited an Auto one). Use the Prepared by drop-down to see one person's.

Q: The Pharmacy link shows a number but I don't see that many rows.

A: The number adds Awaiting approval and On hold together. Check both tabs; hover the number to see the split.

Q: I clicked Send selected and it says some were "not sent".

A: Each order is checked again at send time. The reason is shown, for example a missing date of birth or "has no API connection yet" for a by-hand pharmacy.

Q: The order says "accepted" but the order status still says Ready to Order.

A: It should change to Ordered within a minute. Refresh the page. If it stays, contact support.

Q: The pharmacy rejected the order. What now?

A: Open the row, read the message, fix the cause (often patient details or the prescription), click Re-stage, then Process order again.

Q: Auto-prepare made an order with the wrong medicine.

A: It copied the saved medication or the last order. Open the row → Open order, fix the lines, keep Save as … medication ticked so next time is right, and Re-stage. Or delete it with ✕.

Q: I turned on Auto-prepare. When does it start?

A: At the next hourly check or the next morning run, for reorders that are already due.

Q: Nurses see the Found at the pharmacy tab empty.

A: That list needs View settings, which nurses do not have by default. The owner can add it in Owner → Roles.

← All Clinic Manager: Ordering and the pharmacy articles
Related articles